Professional Heat Tape Installation – Largest Installer in Minnesota
Sunday, September 1st, 2024
If you live in the greater Minneapolis – St. Paul metro area, you’re in luck! The nations largest installer of premium ice dam and gutter ice prevention systems is your neighbor and we’re excited to hear from you!
If you’re tired of ice dams on your home we can help. Contact us today to get your free roof de-icing system estimate. Resolving your ice dams and gutter ice issues happens in three easy steps:
Step One:
We visit your home to discuss your ice dam issues and gather essential information
Step Two:
We go back to the mothership and create the finest, most detailed estimate you will receive. To see why this matters, read below.
Step Three:
Our experienced crew installs your new ice dam prevention system in a day
Why Choose The Ice Dam Company for your Heat Cable Installation
The Ice Dam Company is owned by Steve Kuhl, owner of Kuhl’s Contracting and Kuhl Design+Build. Our family of companies has been working on homes in the Twin Cities for over 35 years. We have the most triangulated understanding of ice dams, home performance and heat cable systems in the United States. As a result we are the largest installer of ice dam prevention systems around.
We compete against a lot of companies that call themselves experts but in fact are simply installing EasyHeat or comparable big-box store cables. That’s not how we roll (forgive the pun). We install the finest ice dam prevention system in North America made by Radiant Solutions Company.
How Much Does Roof and Gutter Heat Cable Cost?
Good question. The cost to install ice dam prevention heat tape depends mostly on two factors: The type of cable and the amount of cable. That said, we can provide you with some average costs for heat cable systems in Minneapolis.
$938 Install self-regulating heat cable roof de-icing system on one story home with small area of roof and a 10 foot gutter and downspout
$1,500 Cost to put in a 150 foot Heat Tape PRO heat cable on a 200 square foot flat rubber roof (project completed in Wayzata, MN)
$3,200 Price for gutter and roof heat tape installed around 4 scuppers and 4 corresponding commercial downspouts, three stories high
$4750 Install four sections of heat cable on home, including two roof valleys, adjacent gutter systems and one snow sensor and heat cable controller
Heat Tape versus Heat Cable: What’s the Difference?
We get asked a lot about the difference between electric heat tape and electric heat cable. The answer is that there is no difference. Both descriptions apply to apply to a category of ice dam prevention cable that is run, usually in a zig-zag pattern, along the affected eaves of a home/building (See install info here). The height, or distance that pattern runs up the roof is determined by the depth of the over hang on the home. The deeper the overhang, the higher the pattern needs to travel.
Not all heat tape is created equal. Think about the difference between a Pinto and an Audi. Sure, they are both cars, but they are pretty different in terms of quality. Honesty alert: Some heat tape is absolute crap. It’s the stuff sold at big box stores under the names Easy Heat and Frost King, to name a few. It costs about 1/3 that of the heavy duty material we install every day. Guess what the difference in labor cost is to install crappy heat cable versus quality heat cable? Zero. It costs zero dollars more to install long-lasting, efficient ice dam heat tape than it does the cheap stuff. We replace thousands of feet of lousy ice dam heat tape every year in the Twin Cities market. Time and time again we see the cheap cables have failed because they have either burned out or have deteriorated due to normal UV exposure.
The moral of the story is please, don’t buy cheap ice dam prevention cable. It won’t last long and it costs far more to operate than quality cable.
We Install Heat Cable on Any Roof or Gutter System
Given our vast experience as roofing contractors over the past 35 years, we are capable of installing cable on any home, business or industrial facility imaginable. We have seen (and done) it all. We work on asphalt and composite shingles, flat and low-slope roofs, membranes, TPO, roll roofing, torch down roofing, standing seam metal roofs, corrugated metal roofing, R-Panel, flat seam, hand-soldered metal, cedar shake and shingle, spanish tile, concrete tile, natural and synthetic slate, synthetic shakes, and on and on. If you want heat tape installed on it, we can and have done it before.
