Posts Tagged ‘roof heat tape clips’


Clips and Brackets for Heat Cable, Heat Tape and Deicing Coils

Sunday, October 4th, 2015

HEAT CABLE CLIP COST:

CLICK HERE TO BUY ROOF CLIPS FOR SLATE ROOF HEAT CABLE INSTALLATION

$.78 to $1.22 Per Heat Cable Clip (Traditional, mechanically fastened clip used for standard asphalt roofs)

$25.00 to $35.00 Per Heat Cable Clip (Slotted clip used for slate, tile and cedar roofs)

$.78 to $1.22 Per Heat Cable Clip (Traditional, mechanically fastened clip)

We sell a wide variety of clips, brackets and doohickies for the installation of ice dam heat cable. There are three basic varieties of clips one can buy through the Ice Dam Company.

Slate Roof Ice Dam Heat Cables

Roof clips for ice dam heat cables

Mechanically Fastened Heat Cable Clips: 

This type of clip is either nailed or screwed onto the roof. It is by far the most common clip sold on The Ice Dam Company website and is used primarily to secure heat cables and roof deicing wire to asphalt roofs. Our installers use these clips to install ice dam heat cable by either nailing or screwing the clips directly to the roof surface, usually in conjunction with a blob of special polyurethane caulk. Once installed, these clips are used to hold the ice dam cable in place permanently without creating wear points that might eventually abrade through the cable and cause issues with functionality. The average cost of these heat cable and roof deicing wire clips for ice dam control is $.78 to $1.22 Per Heat Cable Clip, depending on style, color and order quantity.

Slotted Clips and Brackets for Heat Cable:

As the name suggests, this family of clips is slotted in order to allow installers to use existing fasteners on a roof system to hold the clip in place. The most common application is the slate roof clip or cedar roof clip. Such clips are slipped up, under the existing roofing material and hooked around the nails being used to hold the clip in place. Using slotted heat cable clips is the suggested method of installing heat cable and roof deicing cables on slate roofs and sometimes on cedar roofs because of the non-invasive, non-destructive nature of the install. Slotted roof heat cable and roof deicing clips are far more expensive for ice dam prevention installations than traditional heat cable clips. The average cost of these heat cable and roof deicing wire clips for ice dam control is $25.00 to $35.00 Per Heat Cable Clip, depending on style, color and order quantity. The vast majority of the slotted clips we sell are made of copper and are for use on slate roofs.

Glue-on clips for ice dam heat cable and roof deicing cable: 

The third and final style of clips we sell are Glue-on clips. These clips are used on metal and single ply roofing systems, such are EPDM (rubber) and TPO membranes. Installing heat cable and roof deicing wire on metal roofs is not nearly as common as on other systems such as asphalt roofs and slate roofs. Metal roofs are simply less prone to ice dams, or more specifically, to damage caused by ice dams. Single ply systems, or roof membranes like TPO or rubber roofs, are even less likely to suffer from the ill consequences of ice dams. This explains why we sell less of this style of roof clip than any other. The average cost of these heat cable and roof deicing wire clips for ice dam control is $.92 to $4.55 Per Heat Cable Clip, depending on style, color and order quantity.

Ice Dam Removal, Ice Dam Prevention

Removing Ice Dams in Minnesota: We Serve Many Areas in the Minneapolis Metro

The Ice Dam company based out of Hopkins, Minnesota, about 5 miles west of Minneapolis. We've done gutter ice removal, roof ice removal and ice dam removal all over the Twin Cities, on new houses and old ones.

Website Design and Development by A.Fruit Design