Heat Tape PRO XL – The Answer to the Outlet Problem

When we install Heat Tape on a clients home, often times we hard-wire the cable directly into their circuit. Sometimes, however, we choose to use our Heat Tape Manufacturer’s (Radiant Solutions) plug-in-ready HeatTape PRO.

One problem that come up often is that there isn’t an outlet near the location on the home where the Heat Tape will terminate. Even though Radiant Solutions Heat Tape has a 48″ cold lead –longer then most company’s 36″ cold lead– many times this is not enough to reach, and we end up working with a licensed electrician to have an outlet installed under the eave that we can plug the Heat Tape into. (The manufacturer doesn’t recommend extension cords, and can’t honor the warranty if one is used.)

Just recently Radiant Solutions released a new product that addresses this very problem. It’s called Heat Tape PRO XL. Heat Tape Pro XL features a 50-foot cold lead, that is designed to reach far away outlets. This solution can save the homeowner a significant amount over hiring an electrician. The result is happy customers.

We are planning to sell Heat Tape Pro XL on this site, but until we do, you can get it at Radiant Solutions Website.


Tags:

Ice Dam Removal, Ice Dam Prevention

Removing Ice Dams in Minnesota: We Serve Many Areas in the Minneapolis Metro

The Ice Dam company based out of Hopkins, Minnesota, about 5 miles west of Minneapolis. We've done gutter ice removal, roof ice removal and ice dam removal all over the Twin Cities, on new houses and old ones.

Website Design and Development by A.Fruit Design